#!/usr/bin/env python
# encoding: utf-8
"""
Glance config file for Geocat v0.8 functionality test comparisons.

Created by Graeme Martin 20100223.
Copyright (c) 2010 University of Wisconsin SSEC. All rights reserved.
"""

import glance.filters as filters

# general settings to control how reports are created
settings = {}
settings['useThreadsToControlMemory'] = True
settings['shouldIncludeImages'] = True
#settings['useSharedRangeForOriginal'] = True
settings['doFork'] = False

# info on the latitude and longitude variables that will be used
lat_lon_info = {}
lat_lon_info['lon_lat_epsilon'] = 0.0001

satzenFilter = (lambda data, filterData: filters.filter_based_on_additional_data_set_min_max_bounds(data, filterData, missingValue=-32768, minOkFilterValue=-100, maxOkFilterValue=70))

# per variable defaults
defaultValues = {}

# a list of all the variables to analyze
#
# If you wish to analyze all possible variables,
# do not place any entries in the setOfVariables (ie. just
# leave it as an empty dictionary)
setOfVariables = {}

setOfVariables['relaz'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_relative_azimuth_angle',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['satzen'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_satellite_zenith_angle',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }


setOfVariables['lon'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_longitude',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['surface type'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_surface_type',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['eco type'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_ecosystem_type',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['solzen'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_solar_zenith_angle',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['lat'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'pixel_latitude',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud mask'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cmask_seviri_cloud_mask',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud mask packed'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cmask_seviri_cloud_mask_packed'
    }

setOfVariables['seviri cloud type'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_ctype_seviri_cloud_type',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud phase'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_ctype_seviri_cloud_phase',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud top temperature'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cld_hght_seviri_cloud_top_temperature',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud top pressure'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cld_hght_seviri_cloud_top_pressure',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud top height'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cld_hght_seviri_cloud_top_height',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud emissivity'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cld_hght_seviri_cloud_emissivity',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

setOfVariables['seviri cloud beta 1112'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cld_hght_seviri_cloud_beta_1112',
    'variable_to_filter_on_a':'pixel_satellite_zenith_angle',
    'variable_to_filter_on_b':'pixel_satellite_zenith_angle',
    'variable_based_filter_a': satzenFilter,
    'variable_based_filter_b': satzenFilter
    }

# 3D variables don't work with the filter
setOfVariables['seviri cloud height quality flags'] = {
    # this entry should correspond to the name in the data file
    'variable_name': 'baseline_cld_hght_seviri_quality_flags1',
    }